An 8m arm for wide gates
Wide gates are where this barrier makes sense. Its aluminium arm runs up to 8m, enough to close a two-lane entry or a gate that trucks swing through, and it comes with a boom rest stand. At that length the far end needs somewhere to sit when it's down, or the arm sags and takes a beating in the wind.
The trade-off is speed. It takes 8s to go up or down. The BGL-100 and BG100 TI close a 5m opening in 6s, so if your gate is 5m or less, one of those moves traffic quicker.
Inputs for sensors and access control
It opens on a dry contact signal, which most access controllers, readers with a relay and push buttons can give. Inputs are listed for a photocell and an air switch, with a loop detector as an option. On an 8m arm we'd fit at least one of these. A long boom coming down on a car roof is an expensive mistake.
- Remote control up to 25 metres
- Automatic or manual mode
- Auto closing time from 1 to 80 s
- Optional access control panel, standalone access control or control button
- 90W motor, SMPS input AC 220V / 110V, 50/60Hz
- IP54 cabinet, 268 x 348 x 1050 mm



