A UHF reader that lives on the desk
Long-range UHF readers go on poles. Before a tag goes onto a windscreen or a pallet, though, someone has to read its number into the software, and a small reader next to the PC is the simple way to do it.
This one connects over USB 2.0 or RS232 (115200 bps by default) and can take its power from the USB port or a 5V supply. It handles EPC Class 1 Gen 2 (ISO18000-6C) tags at more than 50 tags per second, and it can write tags as well, at about half the read distance.
Antenna choice and power limits
The default antenna is a -10dBi circularly polarized PCB antenna, with a 2dBi ceramic antenna as an option for more reach. eSSL's reading-distance figures for the two are muddled on the sheet, so test it with your own tags.
On USB power alone, transmit power is capped at 27dBm (2.7W). A separate supply lets it run at 30dBm (3.6W). Standby draw is 0.25W.
- ETSI 865–867 MHz, or custom across 840–960 MHz
- 2 GPIO inputs and 2 outputs
- Power and read-status lights, plus a buzzer
- 110mm×110mm×17mm



