Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Turnstiles & Flap Barriers

eSSL ET-1219

Compact SUS304 tripod turnstile with RGB status light and RS485

  • 550mm lane
  • δ=1.5mm SUS304 body
  • Size(L*W*H) : 280*260*980mm
  • Pass width : 550mm
  • Power : 35W
  • Material : δ=1.5mm SUS304.

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL ET-1219 Specifications

Size(L*W*H)280*260*980mm
Pass width550mm
Power35W
Materialδ=1.5mm SUS304
Bar MaterialSUS201
MovementTripod turnstile movement with anti-pass back function
Indicator LightRGB light
Power Supply24V 50W
Control UnitMain board
Communication InterfaceDry contact & RS485
Pass rate35-50 persons/minute
Temperature20°C~+70°C
Humidity≤90% No condensation
IPIP4X
EnvironmentIndoor and outdoor (outdoor with canopy)
FeaturesReasonable and reliable design, low noise, smooth operation and long service life.
FeaturesLED indicator, valid card showing green, illegal card showing red.
FeaturesCard can be set "with memory" or "without memory".
FeaturesWith automatic reset function, i.e. after having access to the gate, the gate automatically restores to the locked state if not pass within the time set.
FeaturesCompatible with IC and ID card.
FeaturesExtensible to realize access control, attendance, fees and other functions.

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

A narrow cabinet for tight entrances

If floor space at the gate is limited, look at the footprint first: 280 x 260mm, 980mm tall. The lane beside it is 550mm, and eSSL quotes 35 to 50 people a minute.

The body is 1.5mm SUS304. The arms are SUS201, a cheaper stainless grade, which is one reason it should go indoors or under a canopy outside.

How the ET-1219 signals and connects

An RGB light shows green for a valid card and red for an invalid one, so the guard doesn't have to read a screen. The movement includes anti-passback, and if a person doesn't go through in the set time, the gate locks again on its own.

  • Main board control with dry contact and RS485
  • Works with IC and ID cards
  • Card mode can be set with memory or without memory
  • 24V 50W supply, 35W power
  • IP4X, humidity up to 90% without condensation

More than a door

eSSL lists it as extendable to access control, attendance and fee collection. In practice that means pairing it with the right reader and software, which is the part we plan with you.

eSSL ET-1219 FAQs

Can the ET-1219 be installed outdoors?

Indoors, or outdoors under a canopy. It is rated IP4X, so keep it out of direct rain.

Which cards does it accept?

It is compatible with IC and ID cards through the reader you connect.

How does it connect to a controller?

By dry contact or RS485 from its main board.

Enquire About eSSL ET-1219

You may also like

Related Products

Turnstiles & Flap Barriers

eSSL ET-1000

Stainless steel tripod turnstile for a single staff or visitor lane

  • 520 mm lane
  • 35 persons/min throughput
  • 5 million cycles MCBF
Turnstiles & Flap Barriers

eSSL ET-1200

Centre-cabinet tripod turnstile with arms on both sides for two lanes

  • 520 mm lane
  • 35 persons/min throughput
Turnstiles & Flap Barriers

eSSL ET-2000

Bridge-type SUS304 tripod turnstile with its own 32-bit controller

  • 35 persons/min throughput
  • 5 million cycles MCBF

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.