Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Door Bells

eSSL KDB-10

Wireless doorbell whose push button needs no battery, with a plug-in chime

  • 1 transmitter can control up to 8 AC receivers
  • At most 4 transmitters can control 1 AC receiver
  • The transmitter can be mounted on door frame
  • The chime should be plugged into the socket for main power supply.

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL KDB-10 Specifications

FeaturesBell push button uses kinetic technology, no battery required
FeaturesTransmitter is with LED and waterproof
FeaturesReceiver is power by 110V~240V 50/60Hz, with EU plug
FeaturesLED indicator in the receiver
FeaturesReceiver is with 32 melodies and 4 levels volume control
Features100M operating range in the open air
FeaturesSelf-learning technology avoid interference
FeaturesAmbient LED flashing on the receiver
ColorBlack.
Features of technology1 transmitter can control up to 8 AC receivers.
Features of technologyAt most 4 transmitters can control 1 AC receiver.
InstallationThe transmitter can be mounted on door frame.
InstallationThe chime should be plugged into the socket for main power supply.

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

No battery in the push button

Doorbell buttons usually stop working when their battery dies, and nobody notices until a visitor gives up. The KDB-10's push button uses kinetic technology: pressing it generates the power to send the signal, so there's no battery to replace.

The button is waterproof and has an LED, and it can be fixed on a door frame.

The chime

The receiver plugs into a wall socket, taking 110V to 240V at 50/60Hz on an EU plug. You get 32 melodies, 4 volume levels, an LED indicator and an ambient LED that flashes when the bell rings, which helps in a noisy room.

  • Up to 100m range in open air
  • Self-learning pairing to avoid interference
  • Black finish

eSSL KDB-10 FAQs

Does the KDB-10 button ever need a battery?

No. It's a kinetic button that powers itself when pressed.

Can I add a second chime upstairs?

Yes. One transmitter can control up to 8 receivers.

How far can the button be from the chime?

Up to 100m in open air. Walls and floors inside a building will reduce that.

Enquire About eSSL KDB-10

You may also like

Related Products

Door Bells

eSSL VDB-12

Wi-Fi video doorbell with 1080P camera, two-way talk and a wireless chime

  • Battery: 18650 3.7V 2000MAH
  • Resolution: 1080P

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.