Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Face Recognition Attendance

eSSL AiFace Orcus

Entry-level face and fingerprint terminal with Wi-Fi and a 125 kHz card reader

  • 1,500 faces
  • 3,000 fingerprints
  • 3,000 users
  • Face, fingerprint, card and password verification
  • Face recognition from 30 cm to 200 cm
  • Built-in 125 kHz proximity card reader
  • TCP/IP, Wi-Fi and USB connectivity
  • Basic door control: lock, door sensor and exit button

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL AiFace Orcus Specifications

Display2.4-inch TFT colour LCD (320 × 240)
Camera1 MP WDR binocular
Operating systemLinux
ProcessorDual-core 1 GHz
Memory512 MB RAM / 8 GB ROM
Verification methodsFingerprint, face, card, password
User capacity3,000
Face capacity1,500
Fingerprint capacity3,000
Card capacity3,000
Transaction capacity150,000
Verification speedFingerprint < 0.5 s; face < 0.35 s
Face recognition distance30 cm to 200 cm
FARFace ≤ 0.01%; fingerprint ≤ 0.0001%
FRRFace ≤ 0.02%; fingerprint ≤ 0.01%
Card support125 kHz proximity card (standard)
CommunicationTCP/IP, Wi-Fi, USB
Access control interfaceElectromagnetic lock / electric lock, door sensor, exit button
Power supply12 V DC, 1.5 A
Operating temperature-5 °C to 45 °C
Operating humidity20% to 80% RH (non-condensing)
Dimensions (L × W × H)205.20 × 74.19 × 33.30 mm
SoftwareeTimeTrackLite, eBioServer

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

Touch-free for some, fingerprint for the rest

Some staff like a touch-free punch. Others are used to the fingerprint reader they had before and trust it. The Orcus takes both, plus a 125 kHz proximity card and a password, for 3,000 users in all.

Face capacity is 1,500 against 3,000 fingerprints and 3,000 cards, so on a full device not everyone can be on face. Transactions top out at 1,50,000.

Speed and error rates on paper

Connections are TCP/IP, Wi-Fi and USB. The door side is basic, with a lock, door sensor and exit button, which is fine for one office door. It runs on 12 V DC, 1.5 A and works with eTimeTrackLite or eBioServer. Humidity is rated at 20% to 80%, non-condensing, so a covered spot indoors is the right place for it.

  • Face match under 0.35 s; fingerprint under 0.5 s
  • Face FAR ≤ 0.01%, FRR ≤ 0.02%
  • Fingerprint FAR ≤ 0.0001%, FRR ≤ 0.01%
  • Faces read from 30 cm to 200 cm
  • 1 MP WDR binocular camera, 2.4-inch colour screen

eSSL AiFace Orcus FAQs

Is there Wiegand or an alarm output on the Orcus?

Neither is listed. Its access interface covers an EM or electric lock, a door sensor and an exit button. The Aiface ERIS+HID lists Wiegand if you need it.

Which cards does it read?

125 kHz proximity cards, through the built-in reader.

Can I take data off without the network?

Yes. It has a USB connection alongside TCP/IP and Wi-Fi.

Enquire About eSSL AiFace Orcus

You may also like

Related Products

Face Recognition Attendance

eSSL AiFace Jupiter

5-inch face and fingerprint terminal with door outputs, for up to 6,000 faces

  • 6,000 faces
  • 6,000 fingerprints
  • 200,000 logs
Face Recognition Attendance

eSSL AiFace Arion

5-inch face and fingerprint terminal with Wi-Fi, for up to 6,000 staff

  • 6,000 faces
  • 6,000 fingerprints
  • 200,000 logs

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.