Protecting the cable where the door moves
A lock or sensor mounted on the door leaf needs its cable to cross from the frame at the hinge side. Left bare, that cable gets pinched every time the door shuts and eventually breaks. A door loop sleeves it in a flexible metal hose.
This one uses a 304 stainless steel hose with an 8mm inner diameter and zinc alloy fixed heads at each end. Check that your cable fits through 8mm before you start pulling it.
A note on eSSL's spec table
The other lines in the published table (contact rating, NO/COM output, mechanical life) describe an exit button, not a door loop, so we've left them out. Ask us for the hose length if your gap is unusual.



