Small enough to hide in the panel
At 35 x 32 x 17 mm, this receiver board fits inside a power supply box or controller enclosure, out of sight and out of reach.
It listens on 433MHZ and uses learning code: it learns each remote you pair with it, and only those remotes trigger it. Receive sensitivity is listed as better than -105dB.
What the relay can switch
The contacts are rated up to 10A/30VDC or 10A/250VAC. A 12V door lock is nowhere near that, so there's plenty of headroom if you trigger another low-voltage device with it.



