Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Door Access Control

eSSL FQR-100

QR code and proximity card reader with Wiegand output, for visitor and pass entry

  • Interface: Wiegand26/34
  • Decoding support: Screen QR code
  • QR Code Reading range: 0-20CM
  • DC 12V 1000MA
  • Identify paper or screen QR Code
  • Support 26/34 weigand output to third party Access Control system
  • Identify QR code Size :20-100mm.

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL FQR-100 Specifications

Size(L*W*H)86*86*42mm
MaterialABS Waterproof
InterfaceWiegand26/34
Decoding supportScreen QR code
VoltageSupport 4-15V Wide voltage input
Current800mA
Reading directionsCamera centric slant 45°
Reading speed< 200ms
QR Code Reading range0-20CM
Reading featureAuto-induction, beep hint
Light sourceWith LED light source itself, anti-highlight interference
Decode ModeImage decoding
Application environmentTemperature:-20~70℃ Humidity:10%~90%
Indicating status lightBlue-Work, Green-Feedback
Card Reading range3-6CM
Reading card typeProximity
FeaturesDC 12V 1000MA
FeaturesIdentify paper or screen QR Code
FeaturesSupport 26/34 weigand output to third party Access Control system
Identify QR code Size20-100mm

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

Letting visitors in with a QR pass

Visitors don't carry access cards, but nearly all of them carry a phone. The FQR-100 reads a QR code shown on a phone screen or printed on paper and passes it to your access control panel as Wiegand 26 or 34. It reads proximity cards too, so staff keep using theirs on the same door.

The camera reads at a 45° slant from up to 20 cm away and handles codes 20 to 100 mm across. A read takes under 200ms. Its own LED light cuts glare, it senses a code being presented, and it beeps to confirm.

Case, power and what it connects to

It doesn't decide who gets in. That job stays with a panel or controller that accepts Wiegand input.

  • 86 x 86 x 42 mm, waterproof ABS case
  • 4 to 15V wide-range input
  • Proximity cards read at 3 to 6 cm
  • Blue light while working, green for feedback
  • Works from -20 to 70 °C at 10% to 90% humidity

eSSL FQR-100 FAQs

Can the FQR-100 read a QR code on a phone screen?

Yes. It decodes screen QR codes as well as printed ones.

Will it work with my existing access panel?

If the panel accepts Wiegand 26 or 34-bit input, yes. That's the reader's listed output.

Can staff use cards on the same reader?

Yes. It reads proximity cards at 3 to 6 cm.

Enquire About eSSL FQR-100

You may also like

Related Products

Door Access Control

eSSL SF100

Fingerprint and card door terminal that fits a standard 86 × 86 mm wall box

  • 1,500 fingerprints
  • 5,000 cards
  • 80,000 logs
Door Access Control

eSSL C3-400

Four-door access panel for 30,000 users, with Wiegand and RS485 reader support

  • 4-door control
  • 30,000 users
  • 100,000 logs

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.