A desk reader for 13.56MHz cards
Smart cards at 13.56MHz need a reader on the same frequency, and that's what this is: a small USB reader for the admin PC, used when you're issuing cards or checking one that isn't working.
Read range is up to 5cm, so the card goes almost flat on top. That short range also means a second card lying on the desk is less likely to get read by mistake.
Read only, or read and write?
eSSL's page contradicts itself here. One line says it reads the card number only, another lists read and write. If writing data to cards matters for your software, confirm with us before ordering.
- USB interface, powered by USB
- Red and green LEDs and a beeper
- ABS and PC case, 140 x 100 x 30 mm



