Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Boom Barriers

eSSL BG-108

8m aluminium boom barrier with a rest stand, for wide factory and warehouse gates

  • 8m boom
  • 8s open/close
  • IP54
  • Maximum length of Boom : 8m
  • Boom Rest Stand :Yes
  • Arm material : Aluminium
  • Time for Up/down : 8s.

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL BG-108 Specifications

Maximum length of Boom8m
Boom Rest StandYes
Arm materialAluminum
Time for Up/down8s
Input control signalDry contact
Ingress protection DegreeIP54
Input Interface for1. Photocell ,2. Air switch ,3. Loop detector(Optional).
Optional InterfaceAccess control panel, Stand alone access control,Control button
Remote controlYes,upto 25 meters
ModeAutomatic/Manual
Auto closing time1-80s
SMPS - InputAC 220V / 110V, 50Hz / 60Hz
Motor power90W, 220V AC
Dimension(mm)268 X 348 X 1050
operating temprature20˚C ~ +50˚C

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

An 8m arm for wide gates

Wide gates are where this barrier makes sense. Its aluminium arm runs up to 8m, enough to close a two-lane entry or a gate that trucks swing through, and it comes with a boom rest stand. At that length the far end needs somewhere to sit when it's down, or the arm sags and takes a beating in the wind.

The trade-off is speed. It takes 8s to go up or down. The BGL-100 and BG100 TI close a 5m opening in 6s, so if your gate is 5m or less, one of those moves traffic quicker.

Inputs for sensors and access control

It opens on a dry contact signal, which most access controllers, readers with a relay and push buttons can give. Inputs are listed for a photocell and an air switch, with a loop detector as an option. On an 8m arm we'd fit at least one of these. A long boom coming down on a car roof is an expensive mistake.

  • Remote control up to 25 metres
  • Automatic or manual mode
  • Auto closing time from 1 to 80 s
  • Optional access control panel, standalone access control or control button
  • 90W motor, SMPS input AC 220V / 110V, 50/60Hz
  • IP54 cabinet, 268 x 348 x 1050 mm

eSSL BG-108 FAQs

How long does the BG-108 take to open?

8 seconds up or down. If your opening is 5m or less, the BGL-100 or BG100 TI does it in 6 seconds.

Will it close by itself after a vehicle passes?

Yes, in automatic mode. The auto closing time can be set anywhere from 1 to 80 seconds.

Can an RFID or fingerprint reader open it?

It takes a dry contact input and lists access control panels and standalone access control as optional interfaces, so a reader with a relay output can trigger it.

Is it fine out in the open?

The cabinet is rated IP54, which covers dust and splashing rain. Set it on a raised concrete base so water doesn't collect around the foot.

Enquire About eSSL BG-108

You may also like

Related Products

Boom Barriers

eSSL BB-Radar

79GHz radar vehicle sensor for boom barriers, detecting cars at 1-6 m

  • Working Frequency: 79GHz
  • Output Relay: NO/NC
  • Interface: Bluetooth/RS485
Boom Barriers

eSSL BG-CM-300

24V DC brushless boom barrier with speed adjustable from 1 to 6 seconds

  • Product movement: DC brushless
  • Protection class: IP54
  • Brake lever length: 2m

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.