Bolt hardware, despite the EML name
Going by the name you'd expect a magnetic lock. The parts list describes bolt hardware instead: a 205 x 35 x 40 mm face plate, a 90 x 25 x 2 mm strike plate and a 16 mm stainless steel bolt. eSSL quotes a holding capacity of 600 lbs.
An LED magnetic bond sensor is listed too, which gives a visual check that the lock has engaged.
Current draw and plates
It runs on DC 12 V and pulls 950 mA as it starts, settling to 120 mA on standby. The supply needs to handle the start figure, especially if it also powers a reader.
A 215 x 40 x 0.7 mm cover plate is in the parts list.



