Knowing the lock has actually engaged
A controller that only switches power to a lock can't tell whether the door was left ajar. This model adds a lock status signal output, which a controller or alarm panel can read to see if the lock is engaged.
Holding force is 280KG/600LBS, enough for most single office doors, on DC12V.
Body and finish
Lay extra cores for the status signal when you pull the cable, even if the software side gets set up later.
- 250 x 47 x 25.4 mm
- Anodised aluminium cover
- Zinc-finished lock and armature plate
- 0 to 99% humidity, non-condensing



