Runs a door alone or reports to a panel
Fingerprint at the door, Wiegand back to the panel. The F18 can run a single door by itself, using its 12V relay to drive an EM lock, bolt or strike and reading a door sensor. Or it can sit on a multi-door controller as a reader through its Wiegand output.
Matching takes 0.5 seconds or less on a 500 DPI optical sensor, with FAR at or below 0.0001% and FRR at or below 1%.
Exit side, capacity and reports
For fingerprint on both sides of a door, pair it with an FR1200 exit reader, or a KR500 card reader if staff only need to swipe out. Anti-passback and a door bell are built in. If you'd like the exit reader cabled before the walls are finished, tell us at the survey.
- 3,000 fingerprints, plus 5,000 cards with the optional MIFARE or HID Prox reader
- 100,000 transactions
- 2.8-inch colour TFT and keypad
- TCP/IP, USB host and push data
- 12V DC, 1.5A supply; 183 x 80 x 42 mm
Attendance data from the F18
Logs go into eTimeTrackLite, desktop or web, and an SDK is available if your HR software needs the data directly.



