Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Turnstiles & Flap Barriers

eSSL FHT-TL-139

Heavy three-arm full-height turnstile, 220kg, with RS485 or TCP/IP control

  • 650mm lane
  • 5 Million Cycles MCBF
  • Power Supply: 100V ~ 240V AC
  • Control Circuit: 24V DC
  • Power Consumption: 30W
  • Operating Temper range: -25°c ~ +70°c .

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL FHT-TL-139 Specifications

Power Supply100V ~ 240V AC
Control Circuit24V DC
Power Consumption30W
Operating Temper range25°c ~ +70°c
Protection level (IP)> 44
MCBF5 Million Cycles
Humidity95%
Hydraulic damperAdjustable
Solenoid24V DC 100%
ThroughoutPerson
Communication InterfaceRS485 or TCP IP
passage width< 650mm
Frequency< 50Hz or 60Hz
Electro -magnetic driveDC
Section Version120 degrees
No of arms3 arms
Dimensions1630 x 1500 x2310mm
Net weight220kg
FeaturesDesigned for secure operation wish aesthetics inland
FeaturesCorrosion protected S/S frame
FeaturesMinimal exposed hardware
FeaturesHeavy Gauge materials ASTM Standard
FeaturesConsists of rotor assembly, shield Assembly, barrier section, mechanism housing & ceiling plate
FeaturesThe barrier can be set to delay closing in 1 ~ 60s after a valid card reading
FeaturesSingle passage in the set direction
FeaturesBi-directional single passage
FeaturesFree passage in the direction
FeaturesAlways free or locked

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

A 220kg turnstile needs a proper base

This is a heavy unit: 220kg in a frame of 1630 x 1500 x 2310mm, made up of the rotor, shield, barrier section, mechanism housing and a ceiling plate. It needs a level concrete base it can be anchored to, and enough headroom at the gate for the ceiling plate.

The frame is corrosion-protected stainless steel in heavy-gauge material to ASTM standard, with very little hardware exposed for anyone to tamper with.

How the rotor behaves

Three arms sit 120 degrees apart. An adjustable hydraulic damper controls the rotation, and after a valid card the barrier can wait anywhere from 1 to 60 seconds before closing.

Humidity up to 95% is allowed, which covers a monsoon-season gate.

  • Single passage in a set direction, bi-directional, free passage, or always free or locked
  • RS485 or TCP/IP
  • 100-240V AC supply, 24V DC control, 30W
  • 24V DC solenoid rated for 100% duty
  • MCBF 5 million cycles

eSSL FHT-TL-139 FAQs

Does the FHT-TL-139 connect over the network?

It supports RS485 or TCP/IP.

How long does it stay open after a card read?

The closing delay can be set from 1 to 60 seconds.

Is it the same as the FHT-TL-149?

Their published specs are the same, including the 650mm lane and 5 million cycle MCBF. Ask us which suits your gate.

Enquire About eSSL FHT-TL-139

You may also like

Related Products

Turnstiles & Flap Barriers

eSSL ET-1000

Stainless steel tripod turnstile for a single staff or visitor lane

  • 520 mm lane
  • 35 persons/min throughput
  • 5 million cycles MCBF
Turnstiles & Flap Barriers

eSSL ET-1200

Centre-cabinet tripod turnstile with arms on both sides for two lanes

  • 520 mm lane
  • 35 persons/min throughput
Turnstiles & Flap Barriers

eSSL ET-2000

Bridge-type SUS304 tripod turnstile with its own 32-bit controller

  • 35 persons/min throughput
  • 5 million cycles MCBF

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.