Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Turnstiles & Flap Barriers

eSSL FHT-TL-149

Stainless full-height turnstile with hydraulic damper and 1-60 s closing delay

  • 650mm lane
  • 5 Million Cycles MCBF
  • Power Supply: 100V ~ 240V AC
  • Control Circuit: 24V DC
  • Power Consumption: 30W
  • Operating Temper range: -25°c ~ +70°c .

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL FHT-TL-149 Specifications

Power Supply100V ~ 240V AC
Control Circuit24V DC
Power Consumption30W
Operating Temper range25°c ~ +70°c
Protection level (IP)> 44
MCBF5 Million Cycles
Humidity95%
Hydraulic damperAdjustable
Solenoid24V DC 100%
ThroughoutPerson
Communication InterfaceRS485 or TCP IP
passage width< 650mm
Frequency< 50Hz or 60Hz
Electro -magnetic driveDC
Section Version120 degrees
No of arms3 arms
Dimensions1630 x 1500 x 2310 mm
Net weight220kg
FeaturesDesigned for secure operation wish aesthetics inland
FeaturesCorrosion protected S/S frame
FeaturesMinimal exposed hardware
FeaturesHeavy Gauge materials ASTM Standard
FeaturesConsists of rotor assembly, shield Assembly, barrier section, mechanism housing & ceiling plate
FeaturesThe barrier can be set to delay closing in 1 ~ 60s after a valid card reading
FeaturesSingle passage in the set direction
FeaturesBi-directional single passage
FeaturesFree passage in the direction
FeaturesAlways free or locked

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

Four ways to run the gate

Security staff tend to change a gate's mode through the day, and this turnstile gives them four: single passage in a set direction, single passage both ways, free passage in one direction, and always free or always locked. After a valid card it can hold open for anywhere between 1 and 60 seconds.

Control is over RS485 or TCP/IP. The solenoid is 24V DC rated for 100% duty, and an adjustable hydraulic damper keeps the three-arm rotor from slamming round.

Frame and weight

At 220kg and 2310mm tall, it's built to stay put. The stainless frame is corrosion protected, made of heavy-gauge ASTM-standard material and keeps most of its hardware out of reach.

The 120-degree arm spacing lets one person in per turn, and the solenoid's full duty rating means it can stay energised through a long shift.

  • 1630 x 1500 x 2310mm
  • Rotor, shield, barrier section, mechanism housing and ceiling plate
  • 100-240V AC, 24V DC control circuit, 30W
  • MCBF 5 million cycles

eSSL FHT-TL-149 FAQs

What does the hydraulic damper on the FHT-TL-149 do?

It controls how the rotor turns, and it is adjustable, so the arms move steadily rather than swinging freely.

Can the gate be left free for a shift change?

Yes, it has an always-free mode as well as always-locked.

How does it compare with the FHT-TL-139?

The published specifications match, both listing a 650mm lane and 5 million cycles MCBF. We can help you pick between them.

Enquire About eSSL FHT-TL-149

You may also like

Related Products

Turnstiles & Flap Barriers

eSSL ET-1000

Stainless steel tripod turnstile for a single staff or visitor lane

  • 520 mm lane
  • 35 persons/min throughput
  • 5 million cycles MCBF
Turnstiles & Flap Barriers

eSSL ET-1200

Centre-cabinet tripod turnstile with arms on both sides for two lanes

  • 520 mm lane
  • 35 persons/min throughput
Turnstiles & Flap Barriers

eSSL ET-2000

Bridge-type SUS304 tripod turnstile with its own 32-bit controller

  • 35 persons/min throughput
  • 5 million cycles MCBF

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.