Fire release and anti-reverse
Two things matter most on a full-height gate at a factory boundary: it must not be turned backwards to let someone sneak in, and it must let everyone out if the power goes. This turnstile has an anti-reverse device on the rotor, and on power-off it switches from locked to free rotation so it works as a fire exit.
A two-way arrow indicator shows whether a person may pass. If someone with a valid card hasn't walked through in time, the permission lapses. The pass delay and memory mode are set by a DIP switch on the control panel.
Size and control of the FHT-TL-232
The frame is 2200mm long, 1500mm deep and 2200mm high, in SUS304, around a 650mm passage. Plan for that footprint early. We prefer to see the site before the plinth is cast.
- About 30 people a minute, 0.2 second release
- Dry-contact input, 24V drive, 30W
- Two-way or one-way traffic
- DIP switch for pass delay and memory mode



