Closing a vehicle lane on command
Rising bollards go where a boom barrier isn't enough, such as a building forecourt or a restricted gate. The HB-426 uses an electromechanical and hydraulic drive on AC220V, moves in 4S, and when lowered takes a maximum passing pressure of 50T.
The cylinder is 304 stainless steel tube, 220mm across (270mm on request), with 6, 8 or 10mm wall thickness. Standard height is 600mm, customisable from 800mm to 1000mm. The foundation box is Q235 steel, treated with electrophoresis and plastic spraying against corrosion. The unit is IP68 and rated from -30℃ to +55℃.
The HBC-600 controller and safety inputs
The HBC-600 control unit (IP54) runs bollards in groups of two, four or six, by remote at 50 meters or more or from a manual button box. It takes AC 220V in and feeds the bollards DC36V.
Interfaces for a ground sense coil, infrared sensor and TCP/IP let it work with vehicle detection and a control room. If power fails, the bollards can be raised or lowered manually, or by battery as an option.
- Maximum thrust 200Kg
- 3M reflective film, 50mm wide
- LED lamp beads as standard; anti-collision rubber coating with LED strip optional



