A reader for 125 kHz cards, wired to a panel
If your staff carry 125 kHz proximity cards, this is a plain reader for them. It has no memory and no relay of its own. It picks up a card from up to 10 cm away in 300ms or less and passes the number on as 26 or 34-bit Wiegand, with RS485 listed as its communication line as well.
Two input ports let the controller switch the red and green LEDs and the beeper, so the person at the door gets a clear yes or no.
Supply and case size
At 70mA maximum on a 6 to 14V DC supply, it can usually share the controller's power output rather than needing its own adaptor. The black case measures 116 x 75 x 17.3 mm.



