Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Door Access Control

eSSL U11-D

Small USB UHF reader for reading and writing EPC Gen2 tags at a PC

  • USB2.0 communication
  • ETSI (EU): 865–867 MHz
  • OPEN (Custom): 840–960 MHz
  • Protocols : EPC Class 1 Gen 2 (ISO18000-6C)
  • Reading rate :> 50 tags/s
  • Reading distance : -10dBi PCB(default) 2dBiCeramic antenna (option)

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL U11-D Specifications

AntennaDefault -10dBi circularly polarized PCB antenna, optional 2dBi circularly polarized ceramic antenna
RSSI< -75dBm
ETSI (EU)865–867 MHz
OPEN (Custom)840–960 MHz
Interfaces(Can be customized according to user needs or local regulations)
CommunicationUSB2.0 communication/RS232 serial communication, baud rate: 115200 bps (default)
GPIO2in 2out
Work statusPower indicator light, card reading status indicator light, buzzer
DC powerUSB power supply, or connect 5V(+/- 0.25V)power supply
Power consumptionWork : (Separate USB power supply, only allow maximum transmit power 27dBm to work)
Power supply/Consumption2.7W(27dBm)/3.6W(30dBm)
Power supply/ConsumptionStandby
Power supply/Consumption0.25W
Dimension110mm×110mm×17mm Power supply/Consumption
Operating temperature10°C- +55°C
Storage temperature20°C- +60°C
Reading rate> 50 tags/s
Reading distance10dBi PCB(default) 2dBiCeramic antenna (option)
3cm60cm
10cm2.5m
PerformanceThe write distance is about 50% of the read distance

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

A UHF reader that lives on the desk

Long-range UHF readers go on poles. Before a tag goes onto a windscreen or a pallet, though, someone has to read its number into the software, and a small reader next to the PC is the simple way to do it.

This one connects over USB 2.0 or RS232 (115200 bps by default) and can take its power from the USB port or a 5V supply. It handles EPC Class 1 Gen 2 (ISO18000-6C) tags at more than 50 tags per second, and it can write tags as well, at about half the read distance.

Antenna choice and power limits

The default antenna is a -10dBi circularly polarized PCB antenna, with a 2dBi ceramic antenna as an option for more reach. eSSL's reading-distance figures for the two are muddled on the sheet, so test it with your own tags.

On USB power alone, transmit power is capped at 27dBm (2.7W). A separate supply lets it run at 30dBm (3.6W). Standby draw is 0.25W.

  • ETSI 865–867 MHz, or custom across 840–960 MHz
  • 2 GPIO inputs and 2 outputs
  • Power and read-status lights, plus a buzzer
  • 110mm×110mm×17mm

eSSL U11-D FAQs

Does the U11-D need a separate power adaptor?

No, it can run on USB power, but transmit power is then limited to 27dBm. A 5V supply lets it reach 30dBm.

Can it write tags as well as read them?

Yes. eSSL notes the write distance is about 50% of the read distance.

Which frequency band does it use?

ETSI 865–867 MHz, or a custom setting in the 840–960 MHz range.

Enquire About eSSL U11-D

You may also like

Related Products

Door Access Control

eSSL SF100

Fingerprint and card door terminal that fits a standard 86 × 86 mm wall box

  • 1,500 fingerprints
  • 5,000 cards
  • 80,000 logs
Door Access Control

eSSL C3-400

Four-door access panel for 30,000 users, with Wiegand and RS485 reader support

  • 4-door control
  • 30,000 users
  • 100,000 logs

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.