Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Boom Barriers

eSSL BB-Radar

79GHz radar vehicle sensor for boom barriers, detecting cars at 1-6 m

  • Working Frequency: 79GHz
  • Output Relay: NO/NC
  • Interface: Bluetooth/RS485
  • Detection Distance: 1-6M (default 3M)
  • Detection Width: 0.5-1.5M (Right) /0.5-1.5m (Left)
  • Working Frequency: 79GHz
  • Supply Voltage: 9-24VDC/ (12VDC)/1A.

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL BB-Radar Specifications

Detection Distance1-6M (default 3M)
Detection Width0.5-1.5M (Right) /0.5-1.5m (Left)
Working Frequency79GHz
Supply Voltage9-24VDC/ (12VDC)/1A
Power Consumption< 2.5W
Output RelayNO/NC
InterfaceBluetooth/RS485
Dimension107.9*73.6*17.2mm
Net weight140gms
Enclosure RatingIP66
Working Temperature40°C~85°C
Cable length1M
All GroundAdaptable to various grounds like sand, stone or snowy ground.
All WeatherVehicle Detection Sensor applies the newest algorithm that can switch weather conditions automatically.
Stable DetectionThe antenna pitch angle is narrow from ±15° to ±9°. The focused wave makes detection stable.
High ProtectionHigh waterproof and dust proof level that can be used under various situations.
Bluetooth AdjustSupport Bluetooth data adjust which is convenient and timely.
FeaturesOne-click Debugging & Upgrading

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

Sensing the car without cutting the road

A loop detector needs a slot cut into the driveway and a wire buried in it. This 79GHz radar sensor stays above ground and watches the lane instead. It detects vehicles from 1-6M, 3M by default, with a detection width of 0.5-1.5M to the left and to the right.

eSSL says its algorithm switches automatically with the weather and that it copes with sand, stone or snowy ground. The antenna pitch angle is narrowed from ±15° to ±9°, keeping the beam focused so detection stays steady.

Output, setup and housing

It signals the barrier controller through a NO/NC relay, the same kind of contact a loop detector or photocell gives. Settings are adjusted over Bluetooth, RS485 is also available, and debugging or upgrading takes one click.

  • 9-24VDC supply (12VDC, 1A), under 2.5W
  • IP66 enclosure
  • 107.9*73.6*17.2mm, 140gms
  • 1M cable

eSSL BB-Radar FAQs

Can the BB-Radar do the job of a loop detector?

It detects a vehicle at the barrier and gives a NO/NC relay output, without a loop cut into the road.

Can I change the detection range?

Yes. It runs from 1 to 6 m, set to 3 m by default, and it's adjusted over Bluetooth.

Will rain affect it?

It's IP66 rated, and eSSL says the algorithm adjusts to weather conditions automatically.

Enquire About eSSL BB-Radar

You may also like

Related Products

Boom Barriers

eSSL BG-108

8m aluminium boom barrier with a rest stand, for wide factory and warehouse gates

  • 8m boom
  • 8s open/close
  • IP54
Boom Barriers

eSSL BG-CM-300

24V DC brushless boom barrier with speed adjustable from 1 to 6 seconds

  • Product movement: DC brushless
  • Protection class: IP54
  • Brake lever length: 2m

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.