Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Boom Barriers

eSSL Wireless Photo Cell PSA122

Infrared safety photocell with an AA battery option, for gates hard to cable

  • Photocell wavelength: 940nm
  • Technology: Infrared
  • Receiver: ≤ 15m
  • Product Name : 12V Photocell, gate photocell
  • Working voltage : 12-24VAC/DC or 1.5V,LR6AA size (Wired 12V 2Amp suggestable)
  • Working current : Emitter:≤8mA Receiver:≤40mA
  • Photocell wavelength : 940nm.

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL Wireless Photo Cell PSA122 Specifications

Product Name12V Photocell, gate photocell
Working voltage12-24VAC/DC or 1.5V,LR6AA size (Wired 12V 2Amp suggestable)
Working currentEmitter:≤8mA Receiver:≤40mA
Photocell wavelength940nm
TechnologyInfrared
Receiver≤ 15m
Wave Length940nm
Angle of opposite emission≤+/-5°
Receiver range≥12m
Internal Rotation System Adjusted0~180°
Working temperature20℃~+60℃
Relay contact loading capacity1A/30VDC
Photo Cell TypeFor Door Auto door opening throughInfrared sensor
Conductioncan be reduced to 30% in bad weather conditions: For, rain, dust, etc.

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

Fewer cables across the driveway

Cutting a trench across a finished driveway just for a photocell cable is a nuisance. This model can run on 1.5V AA (LR6) cells as well as 12 to 24V AC/DC, which is what makes it wireless. The emitter draws 8mA or less and the receiver up to 40mA.

eSSL still suggests a wired 12V 2A supply where you can run one.

Aiming and range

Receiver range is at least 12m. The beam spreads only about 5 degrees either way, so the two halves need lining up, and the head turns through 0 to 180 degrees to help with that on awkward pillars.

  • 940nm infrared
  • Relay contacts rated 1A at 30V DC
  • Range drops in rain and dust

eSSL Wireless Photo Cell PSA122 FAQs

Does the PSA122 need mains power?

No. It can run on 12 to 24V AC/DC or on AA cells, though eSSL suggests a wired 12V 2A supply where possible.

How is it different from the PSA26?

The Photo Cell PSA26 is the wired version. This one adds the AA battery option so one side doesn't need a cable.

How far apart can the two units be?

The receiver range is listed at 12m or more. Allow some margin for rain and dust.

Enquire About eSSL Wireless Photo Cell PSA122

You may also like

Related Products

Boom Barriers

eSSL BB-Radar

79GHz radar vehicle sensor for boom barriers, detecting cars at 1-6 m

  • Working Frequency: 79GHz
  • Output Relay: NO/NC
  • Interface: Bluetooth/RS485
Boom Barriers

eSSL BG-108

8m aluminium boom barrier with a rest stand, for wide factory and warehouse gates

  • 8m boom
  • 8s open/close
  • IP54

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.