Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Boom Barriers

eSSL BG100 TI

5m aluminium boom barrier, IP55, rated for intensive duty at busy gates

  • 5m boom
  • 6s open/close
  • IP55
  • Maximum length of Boom : 5m (2.5M S + 2.5M B)
  • Boom Rest Stand :Yes
  • Arm material : Aluminium
  • Time for Up/down : 6s .

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL BG100 TI Specifications

Maximum length of Boom5m (2.5M S + 2.5M B)
Boom Rest StandYes
Arm materialAluminum
Time for Up/down6s
Input control signalDry contact
Ingress protection DegreeIP55
Input Interface for1. Photocell ,2. Air switch.
Output interfaceAlarm lamp
Optional InterfaceAccess control panel, Standalone access control,Control button
Remote controlYes,upto 25 meters
ModeAutomatic/Manual
Auto closing time1-99s
SMPS - InputAC 220V / 110V, 50Hz / 60Hz
Motor power90W, 240V AC
Dimension (mm)268 X 348 X 1050
operating temperature20˚C ~ +50˚C
FeaturesCan control by three position switch or by remote control unit, operate ‘OPEN’, ‘CLOSE’ and ‘STOP’
FeaturesMachine core with compression spring, effectively avoids the accidents caused by spring breaking.
FeaturesMotor cooling fan, solving the problem of heat-protection.
FeaturesDouble safety limit switches
FeaturesAuto Close function.
FeaturesManual Release
Duty Cycleintensive
MCBF30 Lakhs
FeaturesTraffic Light interface. (Optional)
FeaturesWire control (switch signal) Remote control ( upto25m)
FeaturesCompatible with Weigand and RFID Readers.
FeaturesCompatible with bio-metric
FeaturesDie-casting aluminum alloy motor, precision and good at thermal radiating
FeaturesSupport the infrared photocell for anti-bumping function (optional)

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

Made for a gate that rarely rests

Busy gates wear barriers out. This one is rated for intensive duty with an MCBF of 30 lakh cycles. The motor is a die-cast aluminium unit that sheds heat well, and it has its own cooling fan for long shifts.

The core uses a compression spring, which eSSL chose to avoid the accidents a snapping spring can cause, and there are two safety limit switches.

Arm, speed and cabinet

The 5m aluminium arm is made of two 2.5m sections and sits on a boom rest stand when closed. It travels in 6s. The cabinet is IP55, one step up from the IP54 on the BGL-100 and BG-S-105.

Controls on the BG100 TI

  • Three-position switch or remote for open, close and stop
  • Remote range up to 25m
  • Auto close, adjustable from 1 to 99 s
  • Works with Wiegand and RFID readers and biometric devices
  • Photocell and air switch inputs; infrared photocell anti-bump is optional
  • Alarm lamp output, with a traffic light interface as an option
  • Manual release

eSSL BG100 TI FAQs

What's the difference between the BG100 TI and BG100 TII?

Both are 5m, 6 second, IP55 barriers. The TII has a fencing boom, with a grille below the arm; the TI has a plain aluminium arm on a rest stand.

Can it be opened by hand if the power fails?

Yes, it has a manual release.

Does it take a loop detector?

The listed inputs are photocell and air switch. A loop detector isn't mentioned for this model, so check with us if you need one.

How many cycles is it built for?

eSSL lists an MCBF of 30 lakh cycles and an intensive duty cycle.

Enquire About eSSL BG100 TI

You may also like

Related Products

Boom Barriers

eSSL BB-Radar

79GHz radar vehicle sensor for boom barriers, detecting cars at 1-6 m

  • Working Frequency: 79GHz
  • Output Relay: NO/NC
  • Interface: Bluetooth/RS485
Boom Barriers

eSSL BG-108

8m aluminium boom barrier with a rest stand, for wide factory and warehouse gates

  • 8m boom
  • 8s open/close
  • IP54

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.