Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Boom Barriers

eSSL BGL-100

5m boom barrier with red and green LEDs built into the aluminium arm

  • 5m boom
  • 6s open/close
  • IP54
  • Maximum length of Boom : 5m
  • Boom Rest Stand : Yes
  • Arm material : Aluminium(with Red & Green LED indication)
  • Time for Up/down : 6s.

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL BGL-100 Specifications

Maximum length of Boom5m
Boom Rest StandYes
Arm materialAluminum(with Red & Green LED indication)
Time for Up/down6s
Input control signalDry contact
Ingress protection DegreeIP54
Input Interface for1. Photocell ,2. Air switch ,3. Loop detector.
LED IndicatorRed / Green
Optional InterfaceAccess control panel, Stand alone access control,Control button
Remote controlYes,upto 25 meters
ModeAutomatic/Manual
SMPS - InputAC 220V / 110V, 50Hz / 60Hz
Motor power90W, 240V AC
Dimension(mm)268 X 348 X 1050
operating temprature20˚C ~ +50˚C

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

Lights on the arm itself

At night a plain arm is hard to see, more so from a car with dipped headlights. The BGL-100 has red and green LED indication on its 5m aluminium arm, so drivers get a clear stop or go signal from a distance.

It takes 6s to raise or lower, and the arm rests on a boom rest stand when closed.

Triggering it and keeping it safe

It opens on a dry contact. There are inputs for a photocell, an air switch and a loop detector, and eSSL lists an access control panel, standalone access control or a control button as optional add-ons. You can run it in automatic or manual mode, or from the remote at up to 25 metres.

  • 90W motor
  • SMPS input AC 220V / 110V, 50/60Hz
  • IP54 cabinet, 268 x 348 x 1050 mm

eSSL BGL-100 FAQs

Are the LEDs on the arm or a separate light?

On the arm. eSSL lists the aluminium arm with red and green LED indication.

How does it compare with the BG100 TI?

Both have a 5m arm and a 6 second travel time. The BG100 TI's cabinet is IP55 against IP54 here, while the BGL-100 has the lit arm.

Can our access control system open it?

Yes. It takes a dry contact input, and an access control panel is one of the listed optional interfaces.

Enquire About eSSL BGL-100

You may also like

Related Products

Boom Barriers

eSSL BB-Radar

79GHz radar vehicle sensor for boom barriers, detecting cars at 1-6 m

  • Working Frequency: 79GHz
  • Output Relay: NO/NC
  • Interface: Bluetooth/RS485
Boom Barriers

eSSL BG-108

8m aluminium boom barrier with a rest stand, for wide factory and warehouse gates

  • 8m boom
  • 8s open/close
  • IP54

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.