Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Gate & Shutter Automation

eSSL GO-I-28

24V DC swing gate opener for light leaves up to 1200 mm wide and 120 kg

  • gates up to 120Kg
  • 24VDC/40W motor
  • 3-10S open/close
  • Power supply: AC220V±10% 50HZ
  • Power of motor: 24VDC/40W
  • Motor rotational speed: 1800RPM
  • Open/close time: 3-10S (adjustable).

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL GO-I-28 Specifications

Power supplyAC220V±10% 50HZ
Power of motor24VDC/40W
Motor rotational speed1800RPM
Open/close time3-10S (adjustable)
Maximum opening angle120°
Maximum door width1200mm
Maximum door weight120Kg
Working temperature20℃~50℃
Features24V DC voltage drive, more safe and reliable
FeaturesDC brushless motor, hull element, accurate limit, working stable, long life time at 2 million cycle
FeaturesSelf-design gearbox, stable structure, low running sound
Safe to use, it has the reverse functionreturn the gate when gate is blocked during closing, stop the gate when gate is blocked during opening
FeaturesRunning speed is adjustable, one button auto learning open and close limit
FeaturesSoft start and soft stop
FeaturesAuto-close function is available
FeaturesEquipped with push and pull rods, flexible selection according to site conditions
FeaturesExcellent synchronous operating performance when double openers installed
FeaturesPhotocell, radar, access control system (face recognition, card reader, fingerprint identifier) and other sensing devices can be connected externally
FeaturesWith fire alarm linkage connection.

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

Sized for narrow, light gates

Check two numbers first. Each leaf can be up to 1200 mm wide and up to 120 kg. That's a pedestrian gate, a bungalow gate or a narrow driveway leaf, not a heavy steel factory gate. For bigger leaves, the GO-O-29 has a 90W motor and the GO-O-19 an 80W one.

Within those limits it opens to 120°, and a full open or close takes 3 to 10 seconds, which you can set.

Motor, safety and control on the GO-I-28

The 40W brushless motor runs on 24V DC from a 220V supply and is rated for 2 million cycles. If something blocks the gate while it's closing, it reverses. If it's blocked while opening, it stops. Soft start and soft stop keep the leaf from banging at either end.

  • One-button auto learning of the open and close limits
  • Adjustable running speed and auto-close
  • Push and pull rods supplied, so it can be mounted to suit the pillar
  • Two openers run in sync on a double gate
  • Inputs for photocell, radar, and face, card or fingerprint access control
  • Fire alarm linkage

eSSL GO-I-28 FAQs

Can I use the GO-I-28 on a gate with two leaves?

Yes, with one opener per leaf. eSSL lists good synchronous operation when two are installed.

Can our face or fingerprint terminal open the gate?

Yes. Access control devices such as face recognition, card readers and fingerprint units can be connected externally, along with a photocell or radar.

My gate leaf is heavier than 120 kg. Will the GO-I-28 manage?

No. The limit is 120 kg per leaf. Look at the GO-O-29 or GO-O-19 instead.

Enquire About eSSL GO-I-28

You may also like

Related Products

Gate & Shutter Automation

eSSL SH-GT16DC

600W brushless shutter motor with encoder limits, for doors under 30 square metres

  • 600W motor
  • Output torque: 120N·m
  • Continual working time: 5min
Gate & Shutter Automation

eSSL SH-GT5.75-ZM

550W rolling shutter motor with 75 N·m torque, for shutters over 5 m tall

  • 550W motor
  • Insulation class: B
  • Thermal protection: 130℃

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.