Encoder limits instead of guesswork
Setting the top and bottom stops is the fiddliest part of fitting a shutter motor. This one uses an encoder with digital position detection, so the travel is set precisely and adjusting it later is straightforward.
The drive is a 220V DC brushless motor rated 600W, giving 120 N·m of output torque, for doors under 30 square metres. Output speed is adjustable from 20 to 50 r/min. The output shaft has a 25.4 mm inner diameter, and the unit weighs 12 kg.
Continuous running is rated at 5 minutes. That's fine for opening and closing a shutter, but it isn't meant for nonstop cycling.
Power failure and anti-crush options
On a shop front where people walk under the shutter, we'd fit at least the infrared detection.
- Hand pull for manual operation during a power failure
- Self-check with prompts if something is wrong
- Air wave switch, infrared detection and alarm lamp can be added for anti-crush protection
- Control unit for open, close and stop, with an emergency button switch



