No separate control panel to wire
On many gate jobs the messy part is the control box. Here the controller is inside the opener, so installation mostly comes down to connecting power and whichever safety devices you want. It moves a sliding gate of up to 600 kg at 12 m per minute on a 24V DC brushless motor of 120W.
That rating covers most house and housing society sliding gates. For something heavier, the HG-BDC-800 uses the same motor and is rated to 800 kg. Relative humidity up to 90% is within its rating, which counts through the monsoon.
Safety devices and switches it takes
An LED flashlight comes on while the gate runs. Soft start and stop are standard, the remote reaches 30 m or more, and if the power fails you release the clutch and slide the gate by hand.
- Photocell for safety
- Wall switch, infrared protector and warning light
- Manual switch for open, stop and close
- Loop detector and access controller, optional
- Auto-close, optional



