Mon - Sat: 10:00 AM - 7:00 PM WhatsApp
Gate & Shutter Automation

eSSL SH-JMT40

Garage door opener for sectional overhead and lift doors, with one-button remote

  • 80W motor
  • Transformer: 100W
  • Force: 30N
  • Power Supply: AC 230V 50/60Hz
  • Power of motor: 80W
  • Current: 8A
  • Transformer: 100W.

Prices vary with quantity, software and installation needs. Contact us for the latest price.

eSSL SH-JMT40 Specifications

Power SupplyAC 230V 50/60Hz
Power of motor80W
Current8A
Transformer100W
Noise level< 65dB
Force30N
Operating temperatures25°C to 65°C
RPM20 RPM
Protection classIP20
Fuses220V 1A - 24V 10A
Feature list1. Automatically reverse safety system.
Feature list2. Easy manual operation in case of power failure.
Feature list3. One button remote control with step by step control mode.
Feature list4. Selectable Auto-closing function.
Feature list5. All settings retained even after power failure.
Feature list6. Magnetic sensor Limits for maximum reliability in dusty conditions.
Feature list7. Auto Courtesy light.
Feature list8. Optional safety beam sensors (recommended) stop the door before contact with an obstruction.
Feature list9. Suitable for and sectional overhead and lift doors

Specifications are based on the manufacturer's published data and may change with model revisions. Please confirm before ordering.

For home garages with sectional doors

A house with a sectional overhead or lift-up garage door needs an opener made for that door, not a shutter motor. That's this one. A single button on the remote steps the door through open, stop and close, and an automatic courtesy light comes on so you aren't parking in the dark.

Noise is listed at under 65 dB. Fuses are rated 220V 1A and 24V 10A, handy to know if you keep spares.

Safety and power failure behaviour

eSSL recommends the safety beams, and so do we, especially in homes with children or pets. Protection class is IP20, so the opener has to be mounted inside the garage, out of the rain. It runs on 230V with an 80W motor and a 100W transformer.

  • Automatic reverse safety system
  • Optional safety beam sensors that stop the door before it touches an obstruction
  • Easy manual operation if the power fails
  • All settings retained after a power failure
  • Magnetic sensor limits, which hold up well in dusty conditions
  • Selectable auto-close

eSSL SH-JMT40 FAQs

Can the SH-JMT40 be fitted outdoors?

No. It's rated IP20, which is for indoor use only.

Do I have to set it up again after a power cut?

No. All settings are kept after a power failure, and the door can be operated by hand while the power is off.

Will the door stop if a car is under it?

It has an automatic reverse safety system. Adding the optional safety beam sensors stops the door before it makes contact.

Enquire About eSSL SH-JMT40

You may also like

Related Products

Gate & Shutter Automation

eSSL SH-GT16DC

600W brushless shutter motor with encoder limits, for doors under 30 square metres

  • 600W motor
  • Output torque: 120N·m
  • Continual working time: 5min
Gate & Shutter Automation

eSSL SH-GT5.75-ZM

550W rolling shutter motor with 75 N·m torque, for shutters over 5 m tall

  • 550W motor
  • Insulation class: B
  • Thermal protection: 130℃

Need an eSSL attendance or access control system?

Tell us your requirement and get the best price with installation and support.